G2固體分析儀 相關配件及耗材

TA儀器TA InstrumentsRSA-G2固體分析儀 相關配件及耗材

RSA-G2 Temperature Options

401892.901

RSA-G2 Forced Convection Oven FCO

401711.901

ARES-G2 and RSA-G2 FCO Camera

402164.901

ARES-G2 and RSA-G2 Chiller Panel

Note: Requires Customer to Purchase Polycold PGC 152 Mechanical Chiller directly from Polycold. This product is built to order.

401041.901

ARES-G2 and RSA-G2 FCO LN2 Controller Option

405001.901

ACS-2 Air Chiller System (220-230VAC; 60Hz)

Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation.

405001.902

ACS-2 Air Chiller System (220-230VAC; 50Hz)

Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation.

405000.901

ACS-3 Air Chiller System (220-230VAC; 60Hz)

Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation.

405000.902

ACS-3 Air Chiller System (220-230VAC; 50Hz)

Note: Requires ARES-G2 & RSA-G2 FCO Air Chiller Panel (P/N: 404041.901) for operation.

404041.901

ARES-G2 & RSA-G2 FCO Air Chiller Panel (for use with ACS-2 and ACS-3 Air Chiller Systems)

RSA-G2 and RSA III Geometries

708.01456

RSA 3-Point Bending Geometry

708.01446

RSA Cantilever Bending Geometry

708.01455

RSA Film/Fiber Geometry

708.01464

RSA Parallel Plate Compression Geometry

708.01466.1

8 mm diameter Plates for RSA Parallel Plate Compression Geometry

708.01466.2

15 mm diameter Plates for RSA Parallel Plate Compression Geometry

708.01466.3

25 mm diameter Plates for RSA Parallel Plate Compression Geometry

708.01461

RSA Shear Sandwich Geometry

708.01465

RSA Contact Lens Geometry Probe and Lens Holder

402198.901

RSA Immersion Geometry and Installation Kit

Note: Includes Tension and 15 mm diameter Compression Fixtures. Also includes 10 mm, 15 mm, and 20 mm 3-point bending fixtures. Compatible with the RSA-G2 and the RSA III. Use with the RSA III also requires the RSA III Immersion Tool Installation  Kit (P/N: 402724.901), available separately (requires installation  by a TA Instruments Serivce Engineer, priced separately).

402724.901

RSA III Immersion Tool Installation Kit

Note: Installation kit necessary for updating the RSA III FCO when using the RSA Immersion Geometry (P/N: 402198.901). This kit requires installation by a TA Instruments Service Engineer, priced separately.

Miscellaneous Accessories

251471.002

DSL Router with 4-Port Switch (for communication between an external controller and Thermal and Rheology instruments)

700.02657.2

ARES, RSA, and TAM Air Dryer

708.01457

Adapters for RSA2 Tools

RSA III Software

402010.901

Orchestrator Polymer Library

RSA-G2 DETA: Dielectric Thermal Analysis Options

402551.901

ARES-G2 and RSA-G2 DETA Accessory Kit

Note: (LCR Meter not included): Requires two RSA-G2 25 mm DETA Geometries (P/N: 402614.901) and customer-supplied Keysight  E4980A LCR Meter (P/N: 613.04946), Keysight E4980AL LCR Meter (P/N: 203330.001), or Keysight 4285A LCR Meter (P/N: 201259.001).

402614.901

RSA-G2 25 mm DETA Geometry: for use with the RSA-G2 DETA option (P/N: 402551.901)

404005.901

RSA-G2, Disposable DETA Geometry: for use with the RSA-G2 DETA option (P/N: 402551.901)

613.04946

Keysight E4980A LCR Meter for ARES-G2 and RSA-G2 DETA: frequency range: 20Hz. to 2MHz.; AC test signal (potential)  0.005 to 20 Volts (115/230VAC; 50/60Hz)

201259.001

Keysight 4285A LCR Meter for ARES-G2 and RSA-G2: frequency range: 75kHz. to 30MHz.; AC test signal (potential) 0.005 to 10 Volts (115/230VAC; 50/60Hz)

203330.001

Keysight E4980AL/120 LCR Meter for ARES-G2, RSA-G2, and DHR DETA: frequency range: 20Hz to 1MHz; AC test signal  (potential) 0.001 to 2 Volts (115/230VAC; 50/60Hz)

 TA儀器TA InstrumentsRSA-G2固體分析儀 相關配件及耗材